Ceramic Window Tinting Jacksonville

In everyday conversation the two terms are used to describe the same thing. IR stands for infrared, and installers often use it to highlight the infrared side of a nano-ceramic film's performance. Kepler IR and IR+ are nano-ceramic automotive ranges, so a quote for "IR tint" and a quote for "ceramic tint" may well be the same product. The detail that matters is which range and which shade you are being quoted, since visible light transmission describes the light passing through and is separate from solar heat performance. Ask the installer to confirm the exact film and shade so you are comparing like with like.

Jacksonville automotive window tint Highlights: Kepler IR and IR+ ranges - shade options - independent installers Kepler Experience

Kepler IR and IR+ are nano-ceramic films, and the ceramic construction is what lets the film work on solar heat rather than relying on shade alone. That is why two films at the same visible light transmission can feel different in the cabin: the light passing through is one measure, and solar heat performance is another. Choosing well is a matter of matching the range and the shade to how you use the vehicle, how much daytime privacy you want and the look you are after. An installer can walk you through both ranges on your own glass.

Request a Jacksonville quote and a Kepler dealer will get back to you quick quote

Alongside our wider car window tinting range, ceramic film is the option drivers reach for when they want more than a change of appearance. A nano-ceramic film can help with glare on a low sun commute, works on solar heat as well as shade, and adds daytime privacy depending on the level you choose. Ceramic construction is non-metallic, so it is a sensible choice if you are concerned about signal interference. Which shade suits you comes down to the look you want and how the vehicle is used day to day.

We also publish information on Florida window tinting regulations. View our guide on local tint laws

Cost depends on the film range you choose, the shade, the vehicle and how many windows are being covered, so there is no single figure that fits every job. Pricing is set by the independent installer who does the work. Ask a local tinter whether they carry Kepler film or can get it.

Your installer will give you aftercare guidance for the film they have fitted, and it is worth following it closely in the first days after fitting. From then on, clean the glass with a soft cloth and a mild, ammonia-free cleaner, and avoid abrasive pads or scrapers on the filmed surface. A quick look over the edges now and then will catch any damage early and keep the film looking as good as the day it went on.

The most reliable comparison is one you make before the film goes on. Ask the installer to show you the manufacturer's data for the exact film and shade you are considering, rather than judging by how dark a sample looks, because visible light transmission and solar heat performance are measured separately. Informal tests with a lamp and thermometer at home can be interesting, but conditions are hard to control and the results are not comparable with published figures. Film choice and legal compliance are separate questions, so check our window tint laws page as well.

Tint rules are set by the state and apply regardless of which film you choose, so it is worth reading them before you settle on a shade. Our window tint laws page sets out the published information for Florida, including the diagrams and technical detail. Selecting a film and meeting the regulations are two separate steps, and your installer can help you match a shade to what the rules allow.

Ceramic film differs from dyed and metallic films in how it is constructed. Kepler IR and IR+ use nano-ceramic technology, which is non-metallic, so it does not carry the signal interference concerns sometimes associated with metallized film. Compared with simple dyed film, ceramic is designed to work on solar heat as well as appearance while keeping the view through the glass clear. As always, compare the exact film and shade rather than the category name.

Film is used in homes too, through our residential window tinting solutions

Ceramic is regarded as the premium end of automotive film because of what goes into it. A nano-ceramic construction addresses solar heat rather than relying on darkness alone, keeps the view clean and, being non-metallic, avoids the signal concerns of metallized films. Drivers who want a considered finish and everyday comfort tend to start their search here.

Kepler supplies film to independent installers, who deal with customers directly. The quickest route is to ask a local tinter whether they carry Kepler film or can get it. If you are approaching a shop you have found yourself, ask whether they can source and install Kepler film before you book.

Jacksonville automotive window tinting Highlights: Kepler IR and IR+ - shade options - independent installers Online Quotes