Home Window Tinting Maryland

They are different products for different jobs. Automotive films are made for vehicle glazing, which varies by make, model and window; residential films are made for the glazing used in houses, including single, double and coated units. Because the glass differs, so does the way a film behaves on it. Start by identifying the glazing you have, then choose a residential film suited to it with help from a dealer.

Our commercial window tinting and residential films are chosen for the glazing they are going onto. Film changes how a pane handles solar energy, and in some combinations of glass type, size, shading and orientation there is a thermal stress consideration. That is why identifying your existing glazing comes first: a dealer can look at what you have and recommend a film suited to it.

Begin with the problem rather than the product. Decide whether the room needs heat control, glare control, privacy, a frosted finish or a near-clear film, then compare the ranges above and note which appearance appeals to you. From there, a dealer can look at your glazing, explain how each option behaves on it, and help you settle on a shade. Visible light transmission describes how much light passes through; it is a separate measure from solar heat performance, so compare the exact film and shade rather than assuming a darker film performs better.

Warranty terms are set by the company that made your windows, and they vary between manufacturers and products. Before film is applied, check your own documentation or ask the glass or window manufacturer directly what their terms say about applied films. A dealer can tell you which film is proposed for your glazing so you have the specifics to hand when you ask.

Kepler commercial window tinting and residential films are specified against the glazing they will be applied to, because thermal stress comes from the way a particular pane absorbs and holds heat. Glass type, size, orientation, edge condition and partial shading all play a part. Identifying the existing glazing before selecting a film is the practical way to manage this, and it is something a dealer will do as part of quoting for the work.

Yes. Film is applied to the surface of the glass and can be taken off again, though removing it cleanly, including the adhesive, is work best left to someone who does it regularly so the glass is left in good condition. If you have existing film you want removed before new film goes on, mention it in your quote enquiry and the dealer can factor it in.

It depends on the film you choose, but the usual reasons are solar heat, glare, ultraviolet filtering that helps slow fading, and daytime privacy. Safety and security films add a bonded layer that can help hold broken glass together, which some homeowners value as an extra measure. Appearance matters too: film gives a consistent look across the glazing from outside.

Solar control film reduces the amount of heat entering through the glass, which can make interior temperatures steadier and lessen the work your cooling has to do on hot afternoons. It is applied to the windows you already have, so it is a way of improving existing glazing rather than replacing it. The effect varies with the film, the shade and the glass, so ask a dealer what is realistic for your home.

Residential films broadly cover solar control, privacy, frosted, UV filtering, glare reduction and safety or security options, in appearances ranging from near-clear ceramic through neutral and reflective to fully blacked out. Each is built for a different priority, so the ranges above are the quickest way to see which family of films matches the room you have in mind.

Kepler supplies the film; independent dealers carry out the work and deal with customers directly. Ask a local tinter whether they carry Kepler film or can get it.