Car Window Tinting Chico

Drivers usually choose window tinting for a combination of reasons, including heat and glare control, UV filtering and added privacy during the day. Reducing the sunlight reaching the cabin can also help limit fading and heat damage to upholstery and trim.

Removing old film can be as involved as installing new film, which is why film quality and careful installation matter from the start. Kepler automotive films are built with a durable scratch-resistant surface layer and are installed by trained independent installers. Ask your dealer about the film you are considering, the shade and the coverage it includes so you know what to expect over the life of the car.

Cost depends on the vehicle, the number of windows and the film you choose. Kepler offers standard, IR and IR+ nano-ceramic ranges, which differ in construction and solar performance. Very cheap work often reflects cheaper material or rushed installation, so it is worth comparing the exact film and shade rather than the headline figure. For an indication of costs, see our car window tinting price guide.

The right shade depends on how you use the car and the look you are after. Visible light transmission describes how much light passes through the film, and it is separate from how the film handles solar heat, so compare the exact film and shade side by side. You can view the full range through our Kepler experience, from light to bold.

You can also read about Kepler commercial window tinting

Tinting rules are set at state level, so check the standards that apply before choosing a shade. For an overview of the levels involved, see our window tint laws page. Non-compliant tint can lead to penalties and removal, so it is worth confirming the current requirements with the official source at California State Laws.

The simplest way to avoid removal is to choose a compliant shade in the first place and have the film fitted professionally. You can review the relevant levels here: window tint laws. Film selection and legal compliance are separate questions, so discuss both with your installer before booking. If existing film does need to come off, an experienced installer is the safest route for the glass and the defroster lines.

Kepler films are multi-layer constructions engineered to work on the parts of the solar spectrum you cannot see. Visible light is only one component of the energy coming through glass; infrared heat and ultraviolet make up a large share of it. Our nano-ceramic IR and IR+ ranges are designed to target that invisible energy, which is why two films with the same visible shade can feel very different inside the car. Compare the exact film and shade when you are weighing up options.

Professionally installed window film does not normally affect a vehicle warranty, as it is applied to the glass rather than to mechanical or electrical systems. Manufacturer terms do vary, so if you have any doubt, check with your dealer or read your warranty documents before booking.

Looking after new film is straightforward. Clean the glass with a soft cloth and a mild, non-abrasive cleaner, and avoid harsh chemicals or scouring pads. Newly applied film needs time to cure, so follow the curing advice your installer gives you before rolling windows down or cleaning the inside of the glass. Slight haze or small water pockets during curing are normal and clear as the film dries. For more detail, see our window tint care guide here for more information.

Tesla owners are well catered for by the Kepler range. With Tesla window tinting, the aim is heat and glare control, UV filtering and added daytime privacy, chosen to suit the car. Tesla glazing differs by model and year, including large roof panels on some cars, so suitability and film choice should be confirmed for your specific vehicle. Your installer can advise on the best combination of film and shade.