Tesla Window Tinting in La Verne, CA

Tint regulations cover things like how light must pass through certain windows and how reflective a film can be, and they differ from state to state. For the details that apply here, see our guide to window tint laws. Choosing a film and complying with the rules are two separate steps, so confirm the legal position for your vehicle with your installer before work goes ahead.

Clean the glass with a soft cloth and a mild, non-abrasive cleaner, avoiding anything gritty or ammonia-based that could mark the film surface. Newly applied film needs time to cure before the windows are lowered or the inside of the glass is cleaned; your installer will tell you how long to wait for the film used on your car. After that, normal careful cleaning is all it takes.

Nano-ceramic film is designed to reduce the solar heat and glare coming through the glass, which makes the cabin more comfortable and takes some of the load off the climate system. It also helps shield the interior from sunlight over time. Because it is non-metallic, it does not interfere with signals in and around the car.

Ready to talk it through? Send your details for a quick quote

Cost depends on the film range and shade you choose, the glass being covered and your Tesla model. Pricing is set by the independent installer, not by Kepler. Ask a local tinter whether they carry Kepler film or can get it. For more information, see pricing guides.

Send your Tesla details for a quote through the quick quote

Teslas often combine large glass panels, frameless door glass and shapes that leave little room for error, so the work usually takes more care and time than a smaller, simpler window. Glazing differs between models and years, which is another reason to talk through your specific car with an experienced installer before booking.

Did you know Kepler film is also used for commercial window tinting? Explore our commercial services

Installers measure film performance with instruments, but you can get a rough sense of it yourself once the film has cured. With a window partly lowered in strong sun, hold your hand behind the tinted section and then behind the exposed glass, and compare how the heat feels. It is an informal comparison rather than a measurement, but it makes the difference noticeable.

The ceramic layers in the film are designed to reject solar energy, including infrared, before it reaches the cabin, which is what keeps the interior more comfortable on a hot day. The same film cuts glare and helps protect the interior from sunlight. There is more on how it works on our ceramic window tint technology page.

Kepler's IR and IR+ ranges are nano-ceramic rather than dyed or metallic, so heat performance is not tied to how dark the film looks and there is no interference with signals. The films are made to stay clear and stable over time, and each range comes in several shades so the finish can be matched to the car and the driver.

You can browse listed businesses through our find a local tinter page, or ask a local tinter whether they carry Kepler film or can get it. Installers are independent businesses, so if availability is not confirmed for a shop you find, simply ask whether they can source and install Kepler film for your Tesla.

Windshields are a common question because of the large glass area above the cabin, but the rules on what may be applied to a windshield are set by state law and are stricter than for other windows. Check the legal position for your vehicle with your installer before deciding. Where a light film is appropriate, Kepler's lighter shades are still built on the same nano-ceramic technology as the darker ones.