Car Window Tinting San Francisco

Tinting the glass on your car can help with heat and glare, along with UV protection and daytime privacy. Cutting the light and UV that reach the cabin also helps limit fading of upholstery and trim over time.

Quality automotive film is made to last, and a careful installation on clean, sound glass is the biggest factor in how well it wears. Keep the glass clean with gentle products, avoid abrasive cloths and scrapers, and the film should stay clear and consistent for years. Ask your installer what warranty applies to the specific film you choose.

The cost depends on the film range and shade you pick and on the size, shape and number of windows on your vehicle. Ask a local tinter whether they carry Kepler film or can get it. For more information, see pricing information.

Kepler offers automotive films in a range of shades, so you can balance appearance with the level of light you want in the cabin. Remember that visible light transmission describes how much light passes through the film; it is a separate measure from solar heat performance, so compare the exact film and shade rather than shade alone. Browse our car films page to compare ranges, or see the tint percentages for a quick overview.

Once you have a shortlist, send it to a dealer with a quick quote

Window tinting is legal, but the shade permitted on each window is set by state law rather than by the city. Read the detail on our window tint laws page before you book, and check it again if you are unsure, since rules can change. These limits exist to keep drivers' views clear, especially at night. Choosing a film and meeting the legal requirements are separate steps, so confirm both with your installer.

Removing old film is fiddly work. Heat softens the adhesive, so a warm day helps if you attempt it yourself, but old or failing film can leave stubborn residue and glass with embedded elements or defroster lines needs care. If you would rather not risk damage, ask a professional installer to strip the old film and prepare the glass before new film goes on.

Kepler IR and IR+ are nano-ceramic automotive ranges, engineered to manage infrared heat while keeping the view through the glass clear. Because performance varies by film and shade, compare the exact product you are considering. You can see the full range on our main page.

Professionally installed window film sits on the inside surface of the glass and is not usually an issue for a vehicle warranty. If you have any doubt, especially with a new or leased car, check the terms with your dealer or manufacturer before booking, and mention any factory glass features such as heated rear glass or antennas to your installer.

Looking after tinted glass is straightforward. Clean with a soft, non-abrasive cloth and a mild cleaner, and skip harsh chemicals and anything scratchy. Give newly installed film time to cure before rolling the windows down or cleaning the inside of the glass; your installer will tell you how long to wait. There is more detail in our tint care and maintenance guide here.

Kepler film is widely used on Teslas, though glazing differs by model and year, so suitability should be checked for your car. Tesla window tinting with Kepler film can address heat, UV and glare through the large glass areas these cars are known for, and shade choice lets you set the look you want. Tell the dealer your model and year when you enquire so the right film and approach can be confirmed.

Explore Kepler car window tinting services