(IR) Ceramic Window Tinting in Evans

In practice the two names describe the same category. IR simply stands for infrared, and installers often use it to highlight that a ceramic film is designed to work on the infrared part of sunlight rather than only on visible light. Ceramic films use non-metallic nano-ceramic particles, so they address solar heat and glare while keeping the view through the glass clear. Kepler IR and IR+ are both nano-ceramic ranges; the useful comparison is not the label but the exact film and shade, since performance figures are published per product and per shade.

Solar energy reaches your car as visible light, ultraviolet and infrared. Ceramic film is engineered to work across that spectrum rather than just darkening the glass, which is why a light ceramic shade can feel very different from a dark dyed film. Visible light transmission tells you how much light passes through; it is a separate measure from solar heat performance, so a lighter film is not automatically a hotter cabin. Ask your dealer for the published data on the exact Kepler IR or IR+ film and shade you are considering, and compare like with like.

We also cover Evans homes with our residential window film options

Ceramic film differs from dyed and metallized products in both construction and behavior. It is chosen for solar heat and glare control, for a clear, natural view, and for a finish that suits the car rather than shouting about itself. Darker shades also make the cabin harder to see into during the day. Because the ceramic layer is non-metallic, it is not designed to interfere with phone, GPS or radio signals, which matters in vehicles full of electronics. Your installer can match a shade to your glazing and the look you want.

Cost depends on the film range and shade you choose, the number of windows and the vehicle itself, so figures vary from job to job. Ask a local tinter whether they carry Kepler film or can get it.

Evans car window tinting Highlights: nano-ceramic film ranges, a choice of shades, a clear view through the glass, and quote enquiries online

Looking after ceramic film is simple. Give any new film the settling time your installer recommends before cleaning it, then use a soft cloth and a gentle, non-abrasive cleaner. Avoid harsh chemicals, scrapers and rough pads, which can scratch or dull the surface. Our how to clean window tint page has fuller care advice.

The most reliable comparison is the published data for the exact film and shade, which your dealer can share. Day to day, most drivers judge film by how the cabin feels in strong sun and how much glare drops on a bright drive. Informal tests with a heat lamp or a thermometer can be interesting, but they are easily skewed by the setup and are not a substitute for the manufacturer's figures. Shade choice is separate from compliance, so check our window tint laws page as well.

We also supply safety and security films for homes and businesses. See our security window film range

Window tinting is regulated, and the rules cover things like which windows may be filmed and how much light must pass through them. Those requirements are set by the state, not by the film you choose, so read them before settling on a shade. Our window tint laws page sets out the details for Colorado, and your installer can help you match a Kepler shade to what you want from the car.

Evans automotive window tinting Highlights: nano-ceramic construction, daytime privacy from darker shades, solar heat and glare control, and quote enquiries online

Ceramic film sits above dyed and metallized products in the way it is built. Dyed films darken glass but do little else, and metallized films can interfere with in-car electronics. Kepler's nano-ceramic IR and IR+ ranges are non-metallic, so signals pass through, and they are made to work on solar heat and glare while keeping the view clean. For any specific comparison, look at the published figures for the exact film and shade rather than the category name.

Want to see the ceramic range in detail? Browse the films

It comes down to construction. Nano-ceramic film is made to manage solar heat and glare without a mirrored or metallic look, and without blocking signals, so the finish reads as part of the car rather than an accessory. Add a clear view through the glass and a range of shades from near-clear to dark, and you have a film that suits owners who care as much about how the car looks as how it feels.

Kepler supplies film to independent installers, who handle their own customers and bookings. Use the dealer finder to look for installers near Evans, or ask a local tinter whether they carry Kepler film or can get it. If a shop's Kepler availability is not confirmed, simply ask whether they can source and install Kepler film for your vehicle.