Up to
98%
Heat Reduction

Port Saint Lucie, Florida
Window tint rules in Florida set out how much light has to pass through each window, and they apply to drivers in Port Saint Lucie like everywhere else in the state. This guide explains how the rules are structured and what to check before you choose a shade, so your tint keeps your view clear and stays within the law.

Tint that falls outside the legal levels can be picked up at a routine stop, and the driver is usually left to put it right. What follows depends on the officer and the circumstances, but the practical outcome is the same: film has to come off, the work has to be paid for, and the vehicle has to be tinted again if you still want it. Choosing a compliant shade at the outset avoids all of it.
Taking film off is slower and more delicate work than putting it on. Adhesives age differently, so some panels release cleanly while others leave residue. Rear windows need particular care because defroster lines sit on the inside surface. That labor is charged on top of the cost of new compliant film.
Florida sets its tint rules by vehicle category, so the standard applied to a sedan is not always the standard applied to an SUV or van. The tables below show how the limits are grouped for passenger and multi-purpose vehicles, with visible light transmission treated window by window. Visible light transmission describes how much light passes through the glass; it is separate from how much solar heat a film rejects, so two films at the same shade can perform very differently.
Passenger Vehicles
Passenger vehicles such as sedans, coupes and hatchbacks have their own tint levels, again set separately for the windshield, front side windows, rear side windows and rear window.
A non-reflective tint / sun strip, is allowed Up to AS1 line as long as it does not go past the AS-1 line on your windshield.
The Florida law allows 28% of light visibility for front side windows.
The Florida law allows 15% of light visibility for rear side windows.
The Florida law allows 15% of light in visibility for the rear window.
Want a car window tinting quote in Port Saint Lucie?
Window Tint Quotes (Port Saint Lucie)
Passenger Vehicles
Hatchback, Sedan, Coupe, Station Wagon
Multi-Purpose Vehicles
Multi-purpose vehicles, including many SUVs, vans and trucks, are measured against their own set of tint levels for the windshield, front sides, rear sides and rear window.
A non-reflective tint / sun strip, is allowed Up to AS1 line as long as it does not go past the AS-1 line on your windshield.
The Florida law allows 28% of light visibility for front side windows.
The Florida law allows 6% of light visibility for rear side windows.
The Florida law allows 6% of light visibility for rear window tint.
Want a car window tinting quote in Port Saint Lucie?
Window Tint Quotes (Florida)
Multi-Purpose Vehicles
SUV, Van, Truck
Confirm current requirements with the relevant authorities before choosing a shade.
Kepler IR and IR+ are nano-ceramic films built around infrared rejection rather than darkness, so a lighter shade can still cut cabin heat. Visible light transmission is a separate measure from solar heat performance, so compare the exact film and shade.
Up to
98%
Heat Reduction
Up to
99%
UV Protection
Up to
96%
Glare Reduction
Review
Warranty terms
Browse the published town guides A to Z. These are information pages and do not confirm a dealer, address or service area in each town.
Florida town pages
Browse the published guides for Florida. These are page counts, not a count of verified dealers or confirmation of service availability.

Opt for Nebula film to enjoy ultimate privacy with a hint of sophistication. The deep shade of Nebula delivers both superior style and enhanced security.
What comes next?
Discover our films in a full 360-degree view, assisting our ceramic window tinting Port Saint Lucie clients to choose the perfect tint shade. See our varietyhere.
Choose your vehicle and send the enquiry. Ask a local tinter whether they carry Kepler film or can get it.


Nearby City Guides

Port Saint Lucie Tesla Window Tint

Port Saint Lucie Window Tint Service

Port Saint Lucie Home Window Tint
Kepler film is made for daily use in hot, bright conditions, with nano-ceramic construction that targets infrared heat and keeps colors stable rather than fading or turning purple over the years. Ask your installer about the warranty terms that apply to the specific Kepler film you choose.
How Kepler works
Kepler makes the film, not the tint job. Independent tinting businesses install window film. For a project in Port Saint Lucie, Florida, ask a local tinter whether they carry Kepler film or can get it, then arrange the work directly with that shop.
Start your quote requestFilm availability and installation services vary by independent shop.
Kepler makes automotive and architectural window film, from everyday tint to nano-ceramic.
Independent tinting businesses install window film. Ask a local shop whether they carry Kepler film or can get it.
Share your project details, then ask an independent local tinter whether they carry Kepler film or can get it.
Check the current official tint rules and enforcement guidance for your vehicle. If you receive a citation, follow the instructions on that notice and confirm any required action with the issuing authority. Do not rely on this page for a penalty amount or a prediction about the outcome.

Nearby
Review nearby city pages connected to Port Saint Lucie, Florida when comparing local tinting guidance and legal tint resources.
All Florida townsAsk a local tint shop whether they carry Kepler window film or can order it for your installation.
These Google listings are independent businesses. Contact each shop to confirm whether it installs Kepler film; appearing here does not mean it is a Kepler dealer.
Enter your town or ZIP code to find shops close to you.
Maps and business listings are provided by Google. Google Maps terms · Google privacy policy