Image 01

Text 01Commercial

Text 02Safety & Security Window Film in Florida

Text 03Explore Florida

Security Window Film Quote View films

Text 04

Security Film for Florida Buildings

Text 05

When a window breaks, most of the danger and most of the damage comes from the glass itself. K-Shield is Kepler's 8 mil safety and security film, designed to help hold shattered glass together while adding UV protection to the windows you already have. Kepler makes the film; ask a local tinter whether they carry Kepler film or can get it.

Logo 03

Logo 04

Logo 05

Image 02

Kepler Specialist Installing Security Window Film

Text 06

Protect What Is Behind the Glass

Text 07

Glass is usually the weakest part of a building, and an untreated pane gives way at the first serious hit. K-Shield changes what that pane does once it has broken: the pieces stay bonded to the film instead of dropping out of the frame. It is a layer that works alongside your locks, alarms and cameras rather than replacing any of them.

Image 03

security window film safeguard background

Text 08

What an Alarm Cannot Do

Text 09

An alarm reports a break-in that has already happened. Film works on the moment before it, keeping a fractured pane held together rather than letting it empty into the room. No film makes a window impenetrable, so treat K-Shield as one part of how the building is secured, not as the whole of it.

Image 04

Text 10

Slowing Entry

Image 05

Studio microphone and high-value business gear protected by security film

Text 11

Shield High-Value Equipment

Text 12

Cover the Glass You Already Have

Text 13

K-Shield is made for existing glazing, so a shop front, an office elevation or a run of internal partitions can be treated without replacing the windows. Tell a Kepler dealer in Florida which openings concern you, and they will confirm the film, the finish and the price with you directly.

Image 06

Text 14

What Goes Into K-Shield

Text 15

K-Shield is Kepler's safety and security film, built at 8 mil and designed to help hold shattered glass together while adding UV protection. It is applied to the glass already in the frame, which is what makes it a practical retrofit for occupied Florida buildings.

Text 16

K-Shield is Kepler's 8 mil safety and security film, made to help hold shattered glass together and add UV protection to the windows you already have.

Video 01

Image 07

Text 17

K-Shield: Kepler's Safety & Security Film

Text 18

K-Shield has a different job from a solar-control tint. A tint is chosen for heat, glare and appearance; K-Shield is chosen for what happens when the glass is struck, and Kepler designs it to hold a broken pane together while adding UV protection. If you need the film to meet a defined level of attack, blast or storm resistance, ask for the current product sheet and the test evidence for that exact build-up before you specify it.

Image 08

K Shield 8ml Black - Safety & Security Window Film

Text 21

8mil

Text 22

Thickness

Text 23

Reduce

Text 24

99%

Text 25

Of UV

Text 26

Ultra

Text 27

Bond Adhesive

Text 28

Kepler

Text 29

Warranty

Text 30Safety & Security Film in Florida

Text 31Find Kepler Film Near You

Text 32

Kepler manufactures K-Shield and takes enquiries from anywhere in Florida. Your details go to an independent Kepler dealer, who talks through the glass, the film and the finish with you and gives you the price. That dealer is the one who confirms what they can offer and when.

Text 33

Tell us what needs treating in Florida. Ask a local tinter whether they carry Kepler film or can get it.

Link List 01

Florida Towns and Cities

129 area guides

Bonita Springs Altamonte Springs Kissimmee Palm Bay Miami Jupiter Pinellas Park Lady Lake Lehigh Acres Crestview Tarpon Springs Sanford Miami Gardens Boca Raton Tampa Jacksonville Winter Haven Tallahassee North Port Deltona Port Saint Lucie Hialeah West Palm Beach Riverview Immokalee Apopka Leesburg Cocoa Miami Beach Brandon Lakeland The Villages Murdock Fort Walton Beach Holiday Tavares Pompano Beach Belle Glade St. Petersburg Daytona Beach Fort Myers Panama City Ocala Eustis Palm City Hollywood Palm Beach Gardens Ruskin Auburndale New Smyrna Beach Marco Island Casselberry Ocoee Merritt Island Coral Gables Gibsonton Port Charlotte Navarre Safety Harbor Titusville Coral Springs Deerfield Beach Clearwater Port Orange North Fort Myers Lynn Haven Spring Hill Lake Mary Stuart Pembroke Pines Wellington Sun City Center Fleming Island Bartow Ormond Beach Bradenton Winter Springs Saint Cloud Rockledge North Miami Beach Wesley Chapel Punta Gorda Niceville Dunedin Winter Park Margate Delray Beach Largo Edgewater Cape Coral Pensacola New Port Richey Maitland Homestead Royal Palm Beach Apollo Beach Ponte Vedra Beach Haines City Jacksonville Beach Sarasota DeBary Winter Garden Sebastian Fort Lauderdale Lutz Naples Gainesville Clermont Orlando Coconut Creek Lake Worth Seminole Palm Coast Estero Cantonment Palm Harbor Oviedo Key West Boynton Beach Valrico Ponte Vedra Lake Wales St. Johns Venice DeLand Fort Pierce Vero Beach Plantation Plant City

Text 35

More Kepler Film for Commercial Glass

Text 36

Safety and security film is one tier of Kepler's architectural range. If the same glass also has a heat and glare problem, or a surface that keeps getting marked, these are the two films to look at next.

Image 09

Commercial Window Tinting Technician in Action

Text 37

Commercial Window Film in Florida

Text 38

Solar-control film for offices, shop fronts and glazed elevations, chosen for heat, glare and appearance.

Button 02See Commercial Film

Image 10

Anti-Graffiti Window Film Specialist in Action

Text 39

Anti-Graffiti Film in Florida

Text 40

A removable outer layer that takes the etching or paint. While the damage stays in the film, replacing it restores the look of the glass underneath.

Button 03See Anti-Graffiti Film

Text 41

So what's next?

Text 42

You can price safety and security film online, look up an installer in Florida, or read how the Kepler architectural range is put together. The online figure is a starting point rather than a quote for your building; the dealer who takes your enquiry confirms the price with you.

Text 43

Safety & Security Film Prices in Florida

Button 04Start Your Quote Request

Logo 08

Logo 09

Logo 10

Image 11

Get Security Window Film Pricing on Your Phone

Text 45

Find a Local Tinter

Text 46

Florida Safety & Security Window Tinting City Guides

Button 05View Locations

Image 12

Image 13

Text 47

See the Kepler Architectural Range

Button 06See Kepler Experience

Image 14

Text 48

Architectural Film for Florida Buildings

Button 07-01Commercial Window Tinting

Button 07-02Home Window Tinting

Button 07-03Anti-Graffiti Film

Image 15

Text 49

Car Window Tinting in Florida

Button 08See Car Tinting

Text 50

Where Florida Buildings Use K-Shield

Text 51

Security film earns its place differently in every building. A store worries about a smashed display window, a school worries about what broken glass does in a corridor, and an office worries about what is sitting on the desks. The examples below cover the situations K-Shield is usually specified for in Florida, and what the film is doing in each one.

In a school, much of the glass is at head height: corridor screens, entrance lobbies and classroom doors. K-Shield is designed to hold a broken pane together, which keeps fragments out of a busy corridor and makes a glazed door slower to get through. It belongs inside a wider safety plan alongside the locks, the door hardware and the procedures, rather than in place of them.

You can see how the wider Kepler film range is specified on the Kepler Experience page.

A smash-and-grab depends on the glass giving way at the first hit. With K-Shield bonded across the pane, the glass can crack and still be held together, so getting through it takes longer and makes more noise. There is no published forced-entry rating for K-Shield, so if your insurer or your risk assessment asks for a tested level of resistance, ask your dealer what evidence is available before you commit.

This is the one place to be careful. Florida's building code names hazardous locations, such as glass in and beside doors, where the glazing has to meet the federal architectural glazing standard, and each of those panes must carry a permanent designation that cannot be removed without being destroyed. Film applied to existing glass is not, on its own, a route to that compliance. Separately, nothing may be sold in Florida as hurricane, windstorm or wind-borne debris protection unless it has been approved under the state product approval system, and K-Shield is not offered as opening protection. If your project is driven by code, speak to your building official first.

A shop front is mostly glass, and it stands on its own all night. K-Shield goes onto the glass that is already there, so the window looks the same by day while the film does its work if the pane is ever struck. On a long run of display glazing, the size of the panes and the way they are framed both change what is worth doing, which is why your dealer will want to see them.

Start with a quick quote for K-Shield on your Florida shop front.

Jewelry, watches and small electronics usually sit behind glass twice over: the storefront and then the display case. Security film can be specified for both, so a case is not simply opened with one blow. What the film can achieve depends on the glass in front of it and the frame holding that glass, so it is worth walking your dealer around each one.

Your Kepler dealer can tell you which cases and which windows are worth treating first, and what each would cost.

An office break-in is rarely about the furniture. Laptops, servers and the data on them leave through the same window as everything else. K-Shield is designed to keep that window in one piece for longer, and it does not have to go on every elevation: treating the ground floor and the exposed rear glazing keeps the cost in proportion to the risk.

To find an installer near you, start at our Find a Tinter page.

Counters, lobbies and ground-floor offices are glazed for openness, which is exactly what leaves them exposed. K-Shield adds a layer to that glass without changing how the space looks or how much daylight it gets. Where a specific threat level has to be met, ask for the tested evidence for the whole assembly rather than relying on the thickness figure alone.

For a price on the glazing in your building, start your online quote on our Quick Quote page.

Talk to Kepler About Security Film in Florida

Text 73

Kepler manufactures K-Shield and puts you in touch with an independent installer through our Find a Tinter pages. The dealer you speak to discusses the film, the price and the arrangements with you directly.

Florida, United States

Footer Text 01

Social Links 01

Map 01

Text 100

Common questions about safety and security window film, answered plainly.

It is a film bonded to the face of the glass. The federal architectural glazing standard has a name for the result: organic-coated glass, meaning glass coated and bonded on one or both sides with an applied polymeric film. Kepler's version is K-Shield, an 8 mil safety and security film designed to help hold shattered glass together while adding UV protection. It does not make a pane unbreakable. It changes what the pane does once it has broken.

Glass is strong until it is not. Once an untreated pane cracks, it empties out of the frame in a second. K-Shield is bonded across the face of the glass so the broken pieces stay attached to the film, which keeps the opening covered and keeps fragments off the floor. That matters anywhere a broken window is dangerous as well as inconvenient: schools, offices, clinics and public buildings.

For a price on your own glass, start your online quote on our Quick Quote page.

Treat it as you would any coated glass surface. A soft microfiber cloth and a mild, ammonia-free cleaner are enough; keep blades, scouring pads and abrasive powders away from it. Ask your installer how long to leave a newly fitted film before its first clean, because that depends on the adhesive and on the conditions at the time.

Kepler's architectural film carries a ten-year limited product warranty against confirmed manufacturing defects, claimed through the installer who supplied it, so keep their details with your paperwork.

Tempered glass is heat or chemically treated, and when it breaks it goes into small particles all at once, so the whole pane can leave the frame in a moment. On this glass the edge of the film matters as much as the film itself: film that stops at the visible edge of the glass holds the pieces together but is not attached to the frame. Ask your dealer what they propose at the frame edge and what that proposal is based on.

Laminated glass is already two or more pieces of glass joined to a resilient plastic interlayer, so it is built to hold together when it breaks, and the codes accept it as safety glazing in its own right. Adding film to laminated glass is usually about the surface rather than the structure: UV, glare, appearance or a sacrificial outer layer. If your glazing is already laminated, say so when you enquire, because it changes what the film is worth doing.

To find someone who fits Kepler film, start at our Find a Tinter page.

Thickness is the number everyone quotes, and on its own it proves very little. What matters is the glass you are putting the film on, how the film is finished at the edge of the pane, and what evidence exists for that combination. K-Shield is Kepler's 8 mil safety and security film; if it has to meet a defined level of attack, blast or storm resistance, ask for the test evidence for that build-up rather than accepting a thickness figure.

You can read more about how Kepler film is specified on our Kepler Experience page.

Partly. K-Shield is fitted on the inside of the glass, where it is placed to hold the pane together if it is struck. Graffiti damage happens on the other side of the window, on the outside face that gets etched or sprayed. That is what anti-graffiti film is for, a removable layer applied to the outer surface so the damage stays in the film. Replace that layer and the glass underneath looks as it did. Security film is thicker and is fitted internally while anti-graffiti film is lighter and is fitted externally. Plenty of buildings use both. See how our anti-graffiti film handles the outside of your glass.

In practice one film does both jobs, which is why Kepler lists K-Shield as a safety and security film. Safety describes the accidental case: a pane that is struck, held together and kept off the floor. Security describes the same behaviour when the impact is deliberate and repeated. The film is the same; the reason for fitting it is what changes.

The films on our commercial window tinting page are chosen for heat, glare and appearance instead, so many buildings end up with both.

Annealed glass is cooled slowly during manufacture to control the stresses in it, and it is not treated to break into small particles the way tempered glass is. It is the glass most people picture when they imagine a smashed window, and it gives film a large, continuous surface to hold onto, which makes it a common candidate for a retrofit like K-Shield.

You can price this up on our Quick Quote page.

It depends on the glass and on what you are guarding against. Film that stops at the edge of the visible glass holds a broken pane together but is not connected to the frame, so the pane can still be pushed through as a whole; bonding or mechanically fixing the film edge to the frame is what addresses that. Kepler has not published a tested edge-attachment specification for K-Shield, so ask your dealer what they recommend and what it is based on before you decide.

For the outside face of the glass, see our anti-graffiti film.

Text 02Safety & Security Window Film in Florida

Security Film for Florida Buildings